Our Equipment

Machine Shop Equipment

Lathes
  •    Daewoo Puma 500 CNC: 60 HP; Max 27.5” OD x 6” length or

                Reg 24.8” OD x 62” length, 1500 max rpm

  •    Daewoo Puma 18 CNC: 60 HP; Max 27.5” OD x 6” length or

                Reg 24.8” OD x 62” length, 1500 max rpm

  •     Hyundai V5R Vertical Lathe (CNC): 30 HP; Max 22” OD x 20”

                Max cutting length, 1500 max rpm

  •     Daewoo Puma 12S CNC: 35 HP; Max 15.0” OD x 5” length or

                Reg 14” OD x 30” length, 2000 max rpm

  •      Haas ST30 (CNC): 30 HP, 21 O.D. x 26 with probing, 3200 max rpm
  •      Daewoo Puma 10HC: 30 HP; Max 14.6” OD or Reg. 10.3” OD

                x 19.3” length, 3500 max rpm

  •      Monarch CM 30” x 144” with DRO, 450 max rpm
  •      Monarch 25N 32” x 52” with DRO, 405 max rpm
  •      Lodge-Shipley 18” x 80” with DRO, 1160 max rpm
  •      LeBlod Regal Dual Drive 15’ x 32” with DRO, 1800 ma rpm
Mills
  • Alliant 2 HP Manual w/right angle attachments, 3000 max rpm
  • Haas 2014 VF-3YT Vertical Mill (CNC), 40 x 26 x 25 with probing and fourth axis, 10,000 max rpm
  • Sharp model TMV with DRO 3 HP manual, 3000 max rpm
  • Kearney & Trucker CK315 Horizontal Mill with Arbor, 1500 max rpm
  • Haas 2011 EC-1600 64 x 50 x 32 Horizontal Mill (CNC) with probing, tombstone and rotary table, 6000 max rpm
  • Haas 2011 VF-3 Vertical Mill (CNC), 40 x 20 x 25 with probing and fourth axis, 10,000 max rpm
EDM
  • Charmilles Technologies 310 (1997)(wire)
  • Agies Charmilles Form 30 (2010)(sinker/electrode)
Grinders
  • Kent Surface Grinder 12” x 24”. 5 HP, 3-Axis Automatic (1993)
  • Blanchard Grinder 318 (1956) 36”
  • Dumore Tool Post Grinder ½ HP Model 8475
Broach
  • 25 Ton x 64” Stroke, Oilgear Horizontal Broaching Machine
Miscellaneous
  • Complete tooling for lathes
  • Micrometers, caliper indicators for work up to 30” diameter
  • 2 Ton Top-Running Single Girder Electric Crane
  • Hydraulic Press 175 Ton
  • Arbor Press 3 Ton
  • 20” cut-off saw
  • 7″ carbide stand grinder
  • 2 bench grinders
  • Wellsaw Ø 13” capacity band saw
  • Ø 32” Centrifugal Casting Saw
  • Bead Blast Cabinet
  • Mr. DeBurr vibratory machine

Foundry Equipment

Molding
  • Palmer M200 Sand Mixer (1997)
  • Macawber S2/4 Sandpump System (1998)
  • 2 Ton Top-Running Single Girder Electric Crane
  • Dependable Shell Core Machine
  • $2,250,000 value of patterns Sand and Centrifugal
Welding
  • Hobart 500 amp, TIG, MIG, Pulse MIG, Inverter Technology Welder
  • Radyne 25Kw Induction Brazing System
  • Lincoln Welder Ideal arc 400
  • Miller MIG Unit #30E
  • Gas Welding Set
  • L-TEC PCM 150 plasma-arc
  • Hobart 500 amp, TIG, MIG, Pulse MIG, Inverter Technology Welder
  • Bug-O-Matic Automated Welding Machine
  • WeldTech WT3500 Plasma Transfer Arc (PTA) Welding System
  • Fanuc R-2000iA/200 Positioning Robot
  • Fanuc R-2000iA/165 Welding Robot
Heat Treat
  • KMI/RECCO (2 – 24” W x 36” H x 24” OP), (2 – 48” W x 48” H x 48” OP) All Atmospheric, and Automatic Controls – 2001
Pour Room
  • Inductotherm VIP 200 KW (1985)
  • Inductotherm VIP 350 KW (1998)
  • Inducto Furnace 200 lb (Qty. 2)
  • Inducto Furnace 750 lb (Qty. 2)
  • Inducto Furnace 1000 lb (Qty. 1)
  • Temp Recorder Speedo Max
  • 5 Ton Electric Hoist
  • 2 Ton Top-Running Single Girder Electric Crane
  • 2 Ton Electric Hoist
  • Ladle Heater
  • 9 Ladles
  • Baltimore Air Coil Cooling Tower
  • Water-Cooled Horizontal Centrifugal Casting Machine 32” Max. Casting Diameter, 48” Max. Casting Length
Grind Room
  • Miller Welder 600 amp
  • 32” Abrasive cut-off saw (Geronimo)
  • 20″ Tabor Abrasive saw
  • Palmer Sand Reclaimer
  • 4 Ton Air Dryer  4. Miscellaneous Air & Electric Grinders
  • 2 Ton Top-Running Single Girder Electric Crane
  • Quincy QSB30 Air Compressor (1998)
  • Quincy QR-25 Model 350 Air Compressor (1999)
  • Quincy QSI245 Air Compressor (1998)
  • Sand Blast House and Equipment
Miscellaneous
  • Hyster Forklift 5000 lb (LP)
  • 1 Ton Air Hoist

Computer Software

  • Global Shop Solutions ERP Management Software
  • Esprit Version 2010 Computer-Aided Manufacturing system
  • Veri-Cut NC Verification Simulator
  • Multi DNC
  • Microsoft Office
  • Red Hat Linux
  • AutoDesk Inventor
  • GibbsCam CAM Software

Quality Assurance and Testing

  • Mitutoyo SJ 201 Surface Tester
  • 2013 GNR Atlantis Spectrometer
  • Satec 30WBN (1981) 30,000 lb Tensometer
  • Gage Maker Thread Gages
  • FARO Quantum 4’ Arm (CMM)
  • Various Measuring Instruments
  • 50,000 PSI Pressure Tester, Vessel 7” I.D. x 42” long

    How May We Help you?

    Send us your message, we will get back to you.